Riding a mountain bike is a very technical skill. This means that when you start, it will feel like your skills are not going to hold up for long. But with a bit of practice, you will soon be making all the right turns without even thinking about it. You can ride corners on these best beginner mountain bikes.
You can ride a mountain bike like you ride a road bike, with the same speed and distance, but if you want to enjoy it and make it an enjoyable experience, then you need to learn how to corner. Here’s a simple guide on how to do it right.
The first is without leaning and keeping your bike in a nice riding posture. Lean in at least 35 degrees of the angle so you will be secure on the low part of your seat when cornering around objects or little animals that require you to go tight but with more than enough clearance for them not to touch them even as much they want because they are too small compared to their path through traffic space lengthwise: Make sure therefore that your tires will be firmly on the ground and that you are not leaning a lot.
In mountain biking, there are times when you need to ride straight. For example, when shooting along a trail with sketchy steep inclines and even being present vehicles because the riding surface is not smooth enough for floating on hard tires, both cyclists behind them start honking at each other as if it was fun or nice, which in reality isn’t.
Now that you have your riding posture established and are leaning exactly, how much is needed in the manner of a beginner. You should be maintaining enough speed on these descents while being secure when cornering without going over (staying seated).
The last thing you want to do is be going so fast around the curve that before you even know it, your bike will go too slow and not allow creating enough traction or balance rotation for cornering.
When riding very tight pieces of terrain intended to hold dirt, jump onto them (think skateboarding), keeping low with both feet on each side. Try hitting a tree up high with momentum leading into this rough landing. This is to practice balance rotation and traction control of the bike (bike won’t slide out on a steep slope). So keep the momentum going during this jump!
Warning: You will most likely make mistakes here, too, since it’s easy to do that kind of stuff, even more so muscle memory from earlier riding motions will be nulled by having to do them again after doing something else first then coming back afterward for forgotten skills, as times repeat upon learning. So learn to practice balance rotation in a safe zone with consistency, but also not be afraid of specific rough terrain either as long as it is clean and even-like(natural gradients). Bring all your attention to this focus-making form, so you can think on the fly while riding through difficult sections where they become a natural habit rather than something random.
When you start to tuck your elbows in and rotate, all of a sudden, the bike may lose its balance. What should you do? Stay relaxed on the corners, keep both feet on the pegs while keeping arm support and no death grip with tires or anywhere else.
Going very fast when cornering (or braking) too much is often how riders are deceived into crashing as well since they were trying so hard to gain speed by getting into the corner at a certain speed, so they probably didn’t even consider it’s possible to easily bail on themselves in an instant by not staying relaxed about losing balance.
Practice learning to balance on a little trail board/frame by ducking and rotating your head or body (bike won’t turn) in coordination with using the brakes while keeping both feet fixed upright. Just push down at the same time you want to go left or right, then pull up(through rotation of feet when braking). Add rolling through this motion into it. Make sure you only do this technique without any technical skill since beginners tend toward not using the brakes that much and more so in super slow-speed corners.
Riding small jumps/dumps is a great way to get used to supporting your body weight in four different places (hands, knees, and feet) that needs little coordination. Experienced riders may try this while they wait at lights or when there’s not much traffic, but ultimately, if you have some type of helmet, it can be very helpful for shifting into the position most comfortable for beginners.
-Don’t turn your bike into the trail-Ride on top of berms or use the technical side without anything to slow you down. Avoid taking trails with bigger jumps (preferably no board) until you’re more confident in controlling speed and going over low obstacles.
-Never drop off drops too steep, then bail out at 0 mph by letting momentum carry it away unless there’s something like a makeshift ramp underneath so that you can jump off and maybe land skidding on pavement for a second-even if you don’t crash, more fear will cause more mistakes in braking.
-Don’t risk crashing out of control; instead of trying to turn the bike around at high speed as momentum continues along without realizing how many feet behind your front wheel is touching the ground. The vast majority of riders panic when riding above their limit because they think that small jumps are supposed to be easy (it’s not) or they underestimate how much speed they need.
-Be aware of what you are doing in corners and try to take appropriate lines, but don’t rely on these lines all the time. You can get better at riding off jumps or over obstacles at a slower speed because you are more comfortable in the position and less worried about hitting your brakes too hard-or, not hard enough.
Riding corners on a mountain bike is difficult. A lot of people think it’s impossible to ride a corner, but with some practice and patience, you can learn how to do it. There are several ways to ride a corner on a mountain bike. We have shown two methods in this blog post. We hope that our readers will be able to use these tips and get more comfortable riding corners.
Keep Reading: What is a hybrid bike good for?