We talk about

So many topics, so little time.


I've learned that people will forget what you said, people will forget what you did, but people will never forget how you made them feel.

Charleston

Tea Party

In 1774, the South Carolina Gazette reports on the so-called Charleston Tea Party. You’ve heard of the Boston Tea Party, of course. Charleston had one, too!


Do You Know!



Charleston’s first "tea party" took place on December 3, 1773, thirteen days before the more famous one in Boston. Charlestonians called a meeting to decide their course of action, and all present agreed not to purchase tea. Instead of dumping it into the harbor, they unloaded the tea and stored it in the Exchange building. Not every colonist accepted this agreement, particularly many merchants, but the colonists now had an established system for dealing with future problems. They established the General Committee to enforce nonimportation agreements and resolutions in the colony. In July 1774 a ship tried to bring tea into Charleston with similar results.


- Charleston Tea Party

Read Our Articles


Different Reasons Why Your Air Conditioner Won’t Turn On

If you’re looking for air conditioning tips, the most useful might be knowing why your air conditioner won’t switch on when you need it to work. The last thing you want is for the thermometer outside to reach triple digits when your AC is on the blink. There is nothing worse than being left to sweat and suffer wishing your air conditioner would work and cool things down.

The good news is that you may not need air conditioning repair specialists to solve the problem. Many such problems are relatively simple to diagnose and fix and you can sometimes deal with the issue yourself, saving a whole lot of money on repair costs and keeping your home a lot more comfortable.

Thermostat Problems

The thermostat is the nerve center of your air conditioning system. It’s the device that controls your HVAC, so if you are finding that your air conditioner won’t turn on, the thermostat is often to blame. The issue may lie there while your air conditioner system is actually operating just fine.

You will need to test your thermostat to see if that is indeed the culprit. The first thing to do is set the device to the correct temperature. When you’re ready to test the thermostat, adjust it to a lower temperature and be sure you’ve switched the system to cool. You should hear a click noise indicating that the system has switched on and working.

But if you get no response after adjusting the thermostat accordingly, check the batteries inside the device. If they are old, leaking, or you just can’t remember when you put in the current set of batteries, it probably means you need to install a fresh set. After that, turn to the switch on your circuit breaker. Has it been tripped? See if a fuse has been blown and then see about setting it back into place.

Either of these could be the reason why your air conditioner won’t turn on. But if nothing is wrong with the fuse and the batteries are fresh and you continue to have problems, there are other things to consider.

Damaged Wiring

Air conditioners are like any other piece of delicate equipment, they can begin to break down and show the effects of wear and tear over time. The wiring in any air conditioner system can start to feel this wear and tear and the result can be an inability to turn on when needed. These internal wires could start to erode, snap, or become damaged in some way that would interrupt the proper operation of the air conditioner.

Leaking Refrigerant

The refrigerant in your system moves among a network of tubes and when an air conditioning system is having trouble operating properly, one of the diagnoses will almost always be a shortage of this essential component. Refrigerant is not something that you might expect to run short on as it’s not a consumable element.

If your HVAC system has run low on refrigerant, that can only mean there is a leak somewhere in the system. A leak in this network of tubes means the liquid is dripping out and getting into the air supply which can be a very bad problem.

Proper Airflow

Sometimes, your air conditioner won’t run properly if it’s not getting the air flow it needs. Movement of air through the system is imperative to ensuring that it works correctly. Without it, you can bet your air conditioner won’t turn on. So, you’ll want to check your air filter to see if it’s clean or if it needs to be replaced. A clogged and dirty air filter can hinder that air flow the system needs to run smoothly.

Changing out your filter can also improve the air quality in the home by filtering out those microscopic particles, bacteria, and various hazardous contaminants that can move freely through the home. A clean air filter keeps those harmful elements out of the air and out of your lungs.

Malfunctioning Compressor

The compressor’s main purpose is to pump the refrigerant through your air conditioner system. However, if the compressor starts to malfunction or poops out altogether, you will need to eventually replace that component. The unit will work extra hard to continue trying to do the job it has been tasked to complete, but eventually, even that will tax the system and the air conditioner will end up breaking down entirely.

As a result, it will not turn on and you will be left with an inoperable HVAC system.

How to fix dropped phone in water wont charge? Step by step solution.

The tragedy happens: We have dropped the phone into the water and it is not those with IP68 certification capable of holding it submerged for a few minutes, but a phone that only supports splashes and little else. The causes are not important but acting quickly. Right now, time is key and putting a rescue plan into action becomes essential if we don’t want to end up using one of those ‘old’ terminals that we had at home just in case. If you have dropped phone in water wont charge, you must follow these steps quickly, especially if it has been on the beach since sea ​​salt is a very powerful corrosive.

Fix dropped phone in water wont charge

Follow to steps to fix dropped phone in water wont charge.

Step 1

The most obvious, getting the terminal out of where it is submerged as soon as possible is crucial, and the fewer seconds it takes, the more opportunities we will have. If it was off, don’t turn it on. If it has turned off, do not turn it on to see if it still works. And if it is still on, do not start operating it, just remove the battery quickly, since the electrical contacts of the phone in connection with the water that has entered it can cause a short circuit. And if we see sparks jump, then we must abandon all hope.

Step 2

The problem is that many current phones have a built-in battery, so opening it is a complicated task. If the mobile is a removable battery, look for the so-called Water damage sensor. It should be through the battery hole and consists of a white dot or square that if the phone gets wet, it changes color. This is a security measure that manufacturers put in place for a user to abuse the warranty. If it has changed color, then the warranty is no longer valid and we must try to resuscitate it ourselves. Take this moment also to remove the SIM and microSD card if it had. Anything that can be removed from the mobile, such as cases, covers, covers, external connector, take it away.

Step 3

Now comes the first phase of drying. It is best to place the mobile on a cloth and remove it little by little with another cloth or some absorbent paper. You must move it as little as possible, so that the water does not spread, and check small drops in holes such as the charging port, the plug for the headphones, etc.

Step 4

If you have a vacuum cleaner, do not hesitate to pass it to the terminal, in this way, you can suck any remaining liquid that has been left inside, where we do not reach the cloth. With this method, you could dry a mobile in about 30 minutes. But if you don’t have it, don’t be tempted to use a hairdryer. There indeed are those who recommend it, but the problem is that the heat can be excessive for the mobile’s internal components, and the effect of blowing air that makes a dryer can put possible water remains inside.

Step 5

After making sure that we can no longer dry it by ourselves, it is time to let nature do and follow the indication that has gone viral online: Put the smartphone in rice. Rice certainly helps absorb moisture. And some have revived phones like this and others who have not worked for them. The idea is that you put the mobile in a bag with rice or, if anything, with one of those silica gel bags with anti-humidity balls that come when we buy a case, a suitcase, etc. Put the phone in and leave it for a period of 24 to 48 hours to make sure. And rotate it from time to time so that moisture is absorbed from everywhere.

Step 6

This is an extra step that you may or may not take. After taking out the mobile, you can try to place it for a few hours on an absorbent material such as napkins, kitchen paper, wipes, etc., and leave it in the sun but watching and being careful.

Step 7

The moment of truth: After waiting a minimum of 24 hours, but the battery and try to turn it on. If nothing happens, remove the battery and plug the phone into the charger. If it lights up, it is the battery that is wrong. If it doesn’t light up, it’s because we couldn’t save it. If it turns on and you see that it sounds strange, it is that you still have some water left right in the speaker. For this, there is an amazing app that draws water from the speaker of your mobile.

 
Mahatma Gandhi

Be the change that
you wish to
see in the world.